REASON FOR THE ERROR
Drain error, water can not drain fully within the required drain time(controlled by PCB software)
SOLUTION
-Remove and clean the filter pump filter.
step 1; use a screwdriver or plier or any sharp object.
step 2;take the filter out by unscrewing it counterclockwise.
step 3; wash the filter
step 4; insert the filter and turn to the right(clockwise) and close the lid.
if it insist,
Check drain hose for blockage and proper installation.
Thank you for reaching out to us, according to your question;
''Different Voltage stabilizers have different configurations. If there is an indication of “H” provided on the stabilizer, it probably means incoming Voltage is “HIGH” and beyond the range of Stabilizer.
There is provision of checking Input Voltage, in some Stabilizers, by moving a switch. If the Input Voltage is within the range of Stabilizer (which can be found on the specification plate of the Stabilizer), there may be some fault in Electronic circuit of the Stabilizer.''
mmartonline –
It can be applied only on the body and its also for all skin type.
mmartonline –
The Height is 180cm The Width is 83cm The depth is 66cm
mmartonline –
REASON FOR THE ERROR Drain error, water can not drain fully within the required drain time(controlled by PCB software) SOLUTION -Remove and clean the filter pump filter. step 1; use a screwdriver or plier or any sharp object. step 2;take the filter out by unscrewing it counterclockwise. step 3; wash the filter step 4; insert the filter and turn to the right(clockwise) and close the lid. if it insist, Check drain hose for blockage and proper installation.
Hammed Taye (Guest) –
What is the height and width of htf456 4 doors freezer
Comfort (Guest) –
Can skin solution cream be applied on both face and body? Is it suitable for all completion? Any side effect like, ezema, sunburns, rashes etc? Thanks
Chioma (Guest) –
How do I open the filter compartment, in order to resolve error code E1?
Ugochukwu –
I love the product, delivery was very fast as well.
mmartonline –
Thank you for reaching out to us, according to your question; ''Different Voltage stabilizers have different configurations. If there is an indication of “H” provided on the stabilizer, it probably means incoming Voltage is “HIGH” and beyond the range of Stabilizer. There is provision of checking Input Voltage, in some Stabilizers, by moving a switch. If the Input Voltage is within the range of Stabilizer (which can be found on the specification plate of the Stabilizer), there may be some fault in Electronic circuit of the Stabilizer.''
mmartonline –
Could you please give us some more clarifications regarding your question or you can send us a screenshot of the issue. Thank you.
Order Kor (Guest) –
Why is automatic voltage protector showing H. What should I do.
Ifeanyi –
Good!
Ifeanyi Nwankwo –
It was bigger than it appeared on the image. I actually needed a handy mobile phone not an Okada-man-like type of phone!
Ifeanyi N. –
Nice!
Ifeanyi N. –
Came a little bit slower than expected
Anonymous –
Anonymous –
Good
Ifeanyi N. –
Superb!
mmartonline –
You can place the order directly on our website and have it delivered to your chosen location.
Mike –
How can I get this product
Anonymous –
Wow nice phone